Abstract
Due to the increasing growth of the building sector in Malaysia, efficient information management systems are important in Architectural Consultancy Practices (ACP). Building Information Modelling (BIM) has emerged as a revolutionary application aiming to increase efficiency in the construction process, augment competency, and boost productivity. BIM has not achieved major adoption in ACP due to the lack of comprehensive BIM guidelines for the Schematic Design (SD) and Design Development (DD) stage, low BIM competency, and increased operational expenses linked with technology, training, and software/hardware. Specifically, this study proposes to (1) evaluate the present use of BIM in the SD and DD stages, (2) identify hindrances in these phases, and (3) build a framework of best practice standards for BIM implementation to aid architects. A qualitative investigation is done via structured interviews with eight ACP specialists, each possessing over three years of BIM competence. Results emphasised three critical criteria covering technology, people, and procedures. These concepts encourage design collaboration and installation, better detect defects, and improve simulation and cooperation. Future research needs to explore other BIM tools and additional ACP phases.
Keywords
- Building Information Modelling Search this journal for Building Information Modelling (opens in a new tab)
- Architectural Consultancy Practice Search this journal for Architectural Consultancy Practice (opens in a new tab)
- Schematic Design Search this journal for Schematic Design (opens in a new tab)
- Design Development Search this journal for Design Development (opens in a new tab)
References
- Abdirad, H. (2017). Metric-based BIM implementation assessment: a review of research and practice. Architectural Engineering and Design Management, 13(1), 52–78. https://doi.org/10.1080/17452007.2016.1183474
- Aizat, K., Jamal, A., Mohammad, M. F., Hashim, N., & Mohamed, M. R. (2019). Challenges of Building Information Modelling ( BIM ) from the Malaysian Architect's Perspective. MATEC Web of Conferences, 3, 0–4.
- Arayici, Y., Khosrowshahi, F., Ponting, A. M., & Mihindu, S. (2009). Towards Building Information Modelling (BIM) Implementation in the UK Construction Industry. Fifth International Conference on Construction in the 21st Century (CITC-V), 1–9.
- Ashrof, M., Zakaria, A., Mohd2, T., Asma, N., Hadzaman3, H., & Author, C. (2024). Content Validity of Building Information Modelling (BIM) Assessment Criteria for Framework Formation for Local Government Authorities. Malaysian Journal of Sustainable Environment, 11(1), 279–300. https://doi.org/10.24191/myse.v11i1.CONTENT
- CIDB. (2016). Malaysia Building Information Modelling Report 2016 .pdf. (n.d.).
- CIDB. (2017). 22nd AsiaConstruct Conference Seoul, Korea / Construction Industry Development Board Malaysia (CIDB). Malaysia Country Report, 45, 5–6. http://www.cidb.gov.my/images/content/international/Malaysia----Country-Report-2017--22nd-Asia-Construct.pdf
- Eastman, C., Liston, K., Sacks, R., & Liston, K. (2018). BIM Handbook Paul Teicholz Rafael Sacks.
- Gegana, G. A., Srinaga, F., & Dewi, J. (2022). City Information Modeling as a tool for problem identification and solution in urban space development. Malaysian Journal of Sustainable Environment, 9(3), 21–40. https://doi.org/10.24191/myse.v9i3.18289
- Jo, T. M., Ishak, S. S. M., & Rashid, Z. Z. A. (2018). Overview of the Legal Aspects and Contract Requirements of the BIM Practice in the Malaysian Construction Industry. MATEC Web of Conferences, 203. https://doi.org/10.1051/matecconf/201820302011
- Kasim, N., Zainal Abidin, N. A., Zainal, R., Sarpin, N., Abd Rahim, M. H. I., & Saikah, M. (2017). Best practices of Building Information Modelling (BIM) implementation in the design phase for a construction project. IOP Conference Series: Materials Science and Engineering, 271(1). https://doi.org/10.1088/1757-899X/271/1/012038
- Matthew, T. (2017). Aft ??????? Aft ????????. 1, 7–8.
- Musarat, M. A., Alaloul, W. S., Cher, L. S., Qureshi, A. H., Alawag, A. M., & Baarimah, A. O. (2023). Applications of Building Information Modelling in the Operation and Maintenance Phase of Construction Projects: A Framework for the Malaysian Construction Industry. Sustainability (Switzerland), 15(6). https://doi.org/10.3390/su15065044
- Lembaga Arkitek Malaysia (LAM) (1986), Architects (Scale of Minimum Fees) Rules 1992. Architects Act 1967, Act 117, 1–23 Lian, O. S. (2024). Malaysian market intelligence: sustaining construction momentum amid global pressures. Turner & Townsend. Retrieved June 2, 2024, from https://www.turnerandtownsend.com/
- Pruskova, K. & Kaiser, J. (2019). Implementation of BIM Technology into the Design Process Using the Scheme of BIM Execution Plan. IOP Conference Series: Materials Science and Engineering, 471(2), 0–8. https://doi.org/10.1088/1757-899X/471/2/022019
- Siebelink, S., Voordijk, H., Endedijk, M., & Adriaanse, A. (2021). Understanding barriers to BIM implementation: Their impact across organizational levels in relation to BIM maturity. Frontiers of Engineering Management, 8, 236-257.
- Zakaria, Z., Nasly, M. A., Tarmizi, H., Marshall-Ponting, A., & Zuhairi, A. H. (2013). Exploring the adoption of Building Information Modelling (BIM) in the Malaysian construction industry: A qualitative approach. IJERT: International Journal of Research in Engineering and Technology, 2(8), 384–395
- Zejnilovi?, I. (2017). BIM, Adoption, Implementation, and Future. International Journal of Engineering Research, 13(2), 15–17. www.ijerd.com
Downloads
No downloads have been recorded for this article yet. Figures appear here once readers begin downloading the full text.
How to Cite
Share this article
License
Copyright (c) 2025 Mohd Azrol Baharudin, Muhammad Firdaus Zamin, Farhana Mohammed Isa, Afif Zuhri Muhammad Khodri Harahap (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.
Author (s) should affirm that the material has not been published previously. It has not been submitted and it is not under consideration by any other journal. At the same time author (s) need to execute a publication permission agreement to assume the responsibility of the submitted content and any omissions and errors therein. After submission of revised paper in the light of suggestions of the reviewers, the editorial team edits and formats manuscripts to bring uniformity and standardization in published material.
This work will be licensed under Creative Commons Attribution 4.0 International (CC BY 4.0) and under condition of the license, users are free to read, copy, remix, transform, redistribute, download, print, search or link to the full texts of articles and even build upon their work as long as they credit the author for the original work. Moreover, as per journal policy author (s) hold and retain copyrights without any restrictions.
Keywords
- Building Information Modelling Search this journal for Building Information Modelling (opens in a new tab)
- Architectural Consultancy Practice Search this journal for Architectural Consultancy Practice (opens in a new tab)
- Schematic Design Search this journal for Schematic Design (opens in a new tab)
- Design Development Search this journal for Design Development (opens in a new tab)
Section
Published in
Vol. 17 No. 2(I) (2025)
Digital Economy, Workforce Transitions & Public Health
View issue contents
Published
Submissions
Have research to publish? Information Management and Business Review welcomes submissions.
Make a Submission